Converged Intelligent Omni-Directional PTZ Camera

Converged Intelligent Omni-Directional PTZ Camera

ST2303B/S V6P: The Ultimate Solution for 360° Transmission Line Inspection The ST2303B/S V6P is a state-of-the-art Converged Intelligent Terminal designed to revolutionize the monitoring of transmission line corridors. Engineered for maximum efficiency, this all-in-one device integrates a high-precision Omni-directional Pan-Tilt-Zoom (PTZ) system with powerful AI capabilities. Key Highlights: 360° Intelligent Surveillance: Equipped with a 40X optical zoom lens and a 1/2.8-inch CMOS sensor, it captures crystal-clear details from a full 360° horizontal rotation. Optional downward and rear-view lenses ensure comprehensive coverage. 24/7 Reliability: Featuring Starlight Night Vision and infrared fill light (up to 100m), it delivers vivid images even in 0Lux conditions. The rugged IP67-rated die-cast aluminum shell withstands harsh environments (-25℃~+70℃). AI-Powered Edge Computing: Say goodbye to server overload. The ST2303B/S V6P features front-end analysis, instantly identifying hazards like construction equipment, foreign objects, or wildfires and alerting you in real-time. Eco-Friendly & Independent: Powered by a solar panel and lithium iron phosphate battery, it operates with ultra-low power consumption (only 0.03W in standby), making it perfect for remote installations.
Send Inquiry
Product Introduction

If you're in need of converged intelligent omni-directional ptz camera to help with your business, please be free to buy with our factory. As one of the leading such manufacturers in China, we will offer you low price and unmatched services.

 

 

 

Omni-directional PTZ equipment is equipped with omni-directional PTZ zoom lens and Day & Night Lens, and supports optional downward looking lens. It can be equipped with micro-meteorological sensors, tower tilt, conductor galloping sensor and other online monitoring sensors to realize three-dimensional intelligent inspection of transmission line channels and the body.

V6 details

 

Application Background

Overhead transmission lines are generally several kilometers to hundreds of kilometers long. Line equipment operates in the natural environment for a long time and is affected by various climatic conditions (such as storms, floods, ice and snow, heavy fog, pollution, lightning strikes, etc.); in addition, there are other external damages (such as construction machinery damage, etc.). These factors endanger the safe operation of the line at any time. Therefore, once a failure occurs, it takes a long time to repair, resulting in different degrees of loss. It is necessary to strengthen the inspection of the line, repair and eliminate hidden dangers in time, and formulate safety measures.

 

KBSTG`T~W~O}PGME{VTCCJD

 

Why Choose Senter Vision Intelligent Inspection Equipment for Overhead Transmission Line

 

 

ØSENTER ST2303B high-resolution security camera monitor system can do remote site surveillance. It designed to be used in the place where no power electronic, no network. Because it is powered by solar panels, it communicates with computer system or mobile phone app via GSM, 2G, 3G, 4G.

ØWe use less than 20% of the cost to solve 80% of the demand pain points, significantly reduce the cost and improve the service life.

ØThe most important thing is that we can find hidden dangers in advance, such as wildfires, cranes, bird damage and all the dangers that may damage the transmission line, and then the inspection personnel can arrive at the scene in advance, thus greatly reducing the power outage rate.

A@BK32I}96J87SN6L]4]J`O

QQ20220815145624

 

Technical Parameter

Camera

 

Sensor type

Zoom: 1/2.8-inch CMOS

Day vision: 1/4-inch CMOS

Night vision: 1/2 inch CMOS

Down view: 1/4-inch CMOS (optional)

Rear view: 1/4-inch CMOS (optional)

Wide angle: 1/2.7-inch CMOS (optional)

Pixels

Zoom: 2 million

Day Vision: 16 million

Night vision: 2 million

Down view: 16 million (optional)

Rear view: 16 million (optional)

Wide angle: 16 million (optional)

Maximum resolution

Zoom: 1920×1080

Day vision: 4608×3456

Night vision: 1920×1080

Down view vision: 4608×3456 (optional)

Rear view: 4608×3456 (optional)

Wide angle: 1920×1280 (optional)

Minimum illumination

Color: 0.001Lux@F1.5

Black & White: 0.0005Lux@F1.5

0Lux (IR)

Maximum fill light distance

100m(Infrared fill light)

Type of fill light

Infrared fill light

Wiper function

Manual wipers

Camera lens

Focal length of lens

Zoom: 5.5-130mm

5-220mm (optional)

Day vision: 3.7mm

Night vision: 4.9mm

Down view vision: 3.7mm (optional)

Rear view: 3.7mm (optional)

Lens aperture

Zoom: F1.5-F3.8

F2.2-F4.7 (optional)

Day vision: F2.0

Night vision: F1.65

Down view vision: F2.0 (optional)

Rear view: F2.0 (optional)

Wide angle: F2.4 (optional)

Field-of-view angle

Zoom: 56.9-2.9 (wide-angle - telescopic)

Day vision: V50.6°H64.3°D76.2°

Night vision: V46°H82°D94°

Down view vision: V50.6°H64.3°D76.2° (optional)

Rear view: V50.6°H64.3°D76.2° (optional)

Wide angle: V61°H112°D132° (optional)

Optical zoom

40X

Focus mode

Automatic/semi-automatic/manual

PTZ

 

Rotation range

Horizontal: 0°~360° continuous rotation

Vertical: -90°~+90°

Preset point

256

3D Positioning

Support

Keying speed

Horizontal: 0.1°/s to 23°/s

Vertical: 0.1°/s to 23°/s

Preset point speed

Horizontal: 0.1°/s to 23°/s

Vertical: 0.1°/s to 23°/s

Professional Intelligence

Intelligent identification

Supports automatic identification of common hidden dangers in transmission corridors: construction equipment (tower cranes, cranes, pump trucks, excavators, bulldozers, shovels, rollers, forklifts, piling rigs, graders, gravers, insulated bucket trucks, trucks), missing fixtures (insulators with blown pieces, insulators with missing pieces, fixture pins with missing pins), smoke from hill fires (smoke, open fires), and foreign objects in conductor wires (foreign objects above the wires, foreign objects under the wires-dust-proof nets, foreign objects below the wires-reflective films), and so on.

Front-end analysis

Supports hidden danger analysis on the device side after the device has captured the hidden danger, and transmits the analysis results directly back to the back-end, shortening the vacuum period of image analysis and reducing the pressure on the back-end server.

Local storage back-end access

Support equipment to locally store the video recording video, take the cycle to cover the storage mode, support the back-end at any time to access the equipment side of the video recording, reduce traffic costs

Video

Video compression standard

H.264;H.265;MJPEG

Day-to-Night Conversion

Time Zone Positioning / Optical Sensing

Wide dynamic (physics)

Support

Fog permeability

Electronically transparent fog

Digital zoom

16X

Signal-to-noise ratio

≥55dB

Anti-shake function

Electronic stabilization

Internet

 

Network protocol

HTTP;HTTPS;TCP/IP;IPv4;RTSP;UDP;SMTP;NTP;DHCP;DNS;DDNS;IPv6;802. 1x;SSL;Qos;FTP;UPnP;ICMP;SNMP;SNMPv1/v2c/v3(MIB2);IGMP;ARP;RTCP; RTP;PPPoE;IP Filter;RTMP;Bonjour;TCP;SMB;NFS;NA

Wireless standard

3G/4G/5G

China/lndia:

LTE FDD:B1/B3/B5/B8

LTE TDD:B34/B38/B39/B40/B41 WCDMA:B1/B8

TD-SCDMAB34/B39 EVDO/CDMA:BC0

GSM:900/1800MHZ

Europe and South America:

LTE FDD: B1/B2/B3/B4/B5/B7/B8/B20/B28 LTE TDD: B38/B39/B40/B41

WCDMA: B1/B2/B4/B5/B8 GSM: 850/900/1800/1900MHz

Wi-Fi

Supported, but recommended for testing only

Functionality

 

Regional Focus

Supported

OSD information overlay

Support channel name, time, preset point position, PTZ coordinates, magnification, geographic location, picture

Power supply

 

Power supply method

Solar panel plus battery

Power wastage

Dormant power consumption: 0.03W (device power on without any operation, tested after 30 minutes, only ensure MCU power supply)

Stationary Power Consumption: 0.47W (the device is turned on without any operation, tested after 30 minutes, channel camera and zoom lens for 20 minutes, transmitting 4G data, 3 preset bits switching in turn)

Video power consumption: 2.7W (the device is turned on the video state, turn on 4G, no fill light)

Peak power consumption: 9.9W (the device is turned on the video state, while capturing and analyzing pictures and uploading turned on, fill light)

Solar panel/battery capacity

Standard 6.4V 37.5 AH LiFe + 12V 30W PV panel 20 days

Power supply

Lithium iron phosphate batteries or gel batteries

Working environment

Operating temperature

-25℃~+70℃

Operating humidity

≤95%

Protection class

IP67

Framework

 

Shell material

Die-cast aluminum

Product Size

277.1mm×202m×232.9mm(L×W×H)

Net weight

4.7kg

Installation method

Wall-mounted, angle-mounted

Other items

 

Night vision grade

Starlight Rating

Storage capacity

Optional add-on TF card 16G, 32G, 64G, 128G

Antennas

Built-in antenna

Positioning function

Support GPS

MTBF

≧30000hours

Camera mounting adjustability

Omni-directional manual adjustment according to transmission line direction

Monitoring cycle

Front-end analysis of the default interval of 5 minutes a photo, timed return default 1 hour a photo, and sampling time period can be freely set; equipment to take pictures of the front-end analysis, identification of hidden problems immediately return, no hidden problems return timed return

 

Application Scenarios:

 

 (2).jpg

Any voltage level line channel and tower monitoring.

 (3).jpg

OHL(overhead line transmission)

 (6).jpg

Prevent external damages to above-ground oil and gas pipelines

 

 

Types of Security Hazards

1.Line channel hidden danger

 

 

2.png

Wire foreign body

3.png

External breaking/

construction machinery

 

 

4.png

Personnel activities

5.png

Thick smoke/wild fire

1.Line channel hidden danger

 

 

6.png

Ice detection

7.png

Missing insulator

 

 

8.png

Wire sagging

9.png

Downfall

 

Installation

Two person, three steps, ten minutes

lTwo person operation: One person on the ground and one person on the tower can complete the installation of the whole set of device.

lThree steps:  Simple adjustment under the tower, Minor adjustment to fix on the tower, testing transferred pass on the ground

lTen minutes:  The installation of the device can be completed within ten minutes.

lAfter installation: engineer will do some camera setting to make it work with App and server.

10

Way of working

It can be collected independently or as a fusion terminal host, and it can also be connected to a smart terminal

image image 

Our services & Strengths

We provide partners with the industry's best products and the most close to the needs of users of the solution, with the most attractive incentive policies and cooperation programs, to help you seek to explore market opportunities, transfer them into the actual value and inject long lasting brand industry influence. Our considerate after-sales services and quality assurance system will help you solve all your worries when facing customers. We are willing to join hands with you to achieve success in the development of the Internet of things(IOT) industry.

Shipping & Packing 

                                                                             

lDiscounted Sample

lAuthentic Guarantee

lExcellent After-Sale Service

lFactory Direct Sale

lDHL Fast Delivery

lDispatch Time: within 3 days after payment

l24 hours hot line

 package and shipment

 

 FAQ

 

Q: How to order and pay?

A: We accept T/T (bank transfer), Western Union / Trade Assurance / Crypto-Currency BTC/LTC/ETH/Cash.

Q: What's Your Products Warranty?

A: We Offer 12 Months Warranty after shipment sent.

Q: How to repair the device if any problem ?

A: We will provide technical support online to solve problem; If for the hardware problem , we could send the parts or  components and teach customer to fit if they have technician or can also send back to us to fix it.

 

 

 

 

 

 

Hot Tags: converged intelligent omni-directional ptz camera, China, manufacturers, factory, low price, buy

Send Inquiry

whatsapp

Phone

E-mail

Inquiry